Sealife Sea Dragon flash Guide de dépannage télécharger pdf (Page 8)

Connecting Flash Link optical cable to the external flash

The Flash includes the Flash Link optical cable (item

#SL96208). The optical cable is used to transmit light from the

camera to the light sensor under the flash head. The external

flash will fire when the light sensor detects light coming from

the end of the cable.

The external flash should come with the optical cable already

attached to the flash head, but it is good to know how the cable

can be removed and re-attached.

1. Turn the cable locking screw counter-clockwise by about 2

rotations to loosen the clamping effect of the lock. Do not

remove the locking screws.

2. Insert the optical cable into the hole of the cable lock until the

cable stops [make sure cable is pushed up all the way].

3. Turn the cable locking screw clockwise to lock the cable into

place [finger tight only – Do not over tighten].

1. 2. 3.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Pas de commentaire

Sealife Sea Dragon flash Guide de dépannage Page 8